B6F stainless steel single point load cell, OIML approved (150kg-2t)

• Stainless steel IP67 single point load cell.
• Bending beam.
• Suitable for mobile weighing systems, garbage trucks, belt scales, container and tank scales, etc.
• High accuracy
• Recommended maximum platform size
• for 150kg:   400 x 400 mm
• for 250kg – 500kg: 600 x 800 mm
• for 750kg – 2t: 1200 x 1200 mm

Available Models
Capacity Accuracy Full Article Description
150kg C3 (Excluded from OIML) B6F-C3-150kg-3B6
250kg C3 (Excluded from OIML) B6F-C3-250kg-3B6
500kg C3 B6F-C3-500kg-3B6
750kg C3 B6F-C3-750kg-3B6
1000kg C3 B6F-C3-1000kg-3B6
2000kg C3 B6F-C3-2000kg-3B6

Technical Specifications B6F
Accuracy Class C3 OIML R60 C3
Output Sensitivity ( = FS ) mV/V 2.0 ± 0.2
Maximum Capacity ( Emax ) kg 150, 250 500, 750, 1000, 2000
Max. Number of Load Cell Intervals nLC 3000
Ratio of min. LC Verification Interval Y = Emax / vmin 10000 12000
Combined Error %FS ≤± 0.023
Creep Error (30 minutes) %FS ≤± 0.0245
Temperature Effect on Zero (ZTC) %FS/10°C ≤± 0.014
Temperature Effect on Sensitivity (STC) %FS/10°C ≤± 0.011
Zero Balance %FS ≤± 1.5
Safe Overload %FS 150
Ultimate Overload %FS 300
Eccentric Loading Error %Ld/cm ± 0.002
Excitation, Recommended Voltage V 5 ~ 12
Excitation, Maximum Voltage V 18
Input Resistance Ω 384 ± 4
Output Resistance Ω 350 ± 3
Insulation Resistance (50V) MΩ ≥5000
Compensated Temperature °C -10 ~ + 40
Operating Temperature °C -35 ~ + 65
Load Cell Weight kg 150kg – 500kg: ~4.8 750kg – 2t: ~9.5 – 10.4
Element Material Stainless Steel
Ingress Protection (acc. to EN 60529) IP67
Recommended Torque on Fixation Bolts Nm M12: 100 M16:160
ATEX Classification (optional) II 1G Ex ia IIC T4 Ga II 1D Ex ia IIIC T 200 135°C Da II 3G Ex ic IIC T4 Gc